Description
Kick your mission planning into real time with 3DR Radios, featuring interchangeable air and ground modules, Android tablet compatibility, and protective cases. 3DR Radios allow your ground station computer to communicate with your vehicle wirelessly, providing unparalleled ease of use for viewing in-flight data, changing missions on the fly, and tuning.Select your frequency:Select 915 MHz for the U.S. and 433 MHz for Europe. Frequency regulations vary by country, so consult your local airspace authority to find out which frequency is legal in your area.The 3DR Radio set includes:Two radio modules with antennasMicro-USB cableAndroid OTG adapter cable6-wire Pixhawk connector cable6-to-5-position APM and PX4 connector cableSpecifications:Interchangeable air and ground modules915 or 433 MHzMicro-USB port6-position DF13 connector100 mW maximum output power (adjustable)-117 dBm receive sensitivityBased on HopeRFs HM-TRP moduleRP-SMA connector2-way full-duplex communication through adaptive TDMUART interfaceTransparent serial linkMAVLink protocol framingFrequency Hopping Spread Spectrum (FHSS)Configurable duty cycleError correction corrects up to 25% of bit errorsOpen-source SIK firmwareConfigurable through Mission Planner and APM PlannerSupply voltage: 3.7-6 VDC (from USB or DF13 connector)Transmit current: 100 mA at 20 dBmReceive current: 25 mASerial interface: 3.3 V UART26.7 mm x 55.5 mm x 13.3 mm (without antenna)
featuring interchangeable air and ground modules, Android tablet compatibility, and protective cases
3DR Radios allow your ground station computer to communicate with your vehicle wirelessly, providing unparalleled ease of use for viewing in-flight data, changing missions on the fly, and tuning
Select your frequency:Select 915 MHz for the U.S. and 433 MHz for Europe
The 3DR Radio set includes:Two radio modules with antennasMicro-USB cableAndroid OTG adapter cable6-wire Pixhawk connector cable6-to-5-position APM and PX4 connector cable
Specifications: Interchangeable air and ground modules 915 or 433 MHz Micro-USB port6-position DF13 connector100 mW maximum output power (adjustable)-117 dBm receive sensitivity based on HopeRFs HM-TRP moduleRP-SMA connector2-way full-duplex communication through adaptive TDMUART interfaceTransparent serial linkMAVLink protocol framing Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle Error correction corrects up to 25% of bit errors Open-source SIK firmware
Reviews
There are no reviews yet.